FRP walkways
The main structure consists of in C- and I-profiles, fastened together with secondary beams of the same kind. The connections are made using stainless steel or FRP plates and bolts & nuts.
Handrail Systems are made by assembling the FRP profiles with Cupro-Nickel rivets. The stanchions are placed approximately every 120 cm (max 130 cm) and are fixed to the structural profiles with two bolts; in the fixing spot the stanchion has to be strengthened by a PA reinforcement.
The walking surface is built with a choice of FRP gratings, fixed to the main structure by clamps and bolts & nuts.
Handrail Systems are made by assembling the FRP profiles with Cupro-Nickel rivets. The stanchions are placed approximately every 120 cm (max 130 cm) and are fixed to the structural profiles with two bolts; in the fixing spot the stanchion has to be strengthened by a PA reinforcement.
The walking surface is built with a choice of FRP gratings, fixed to the main structure by clamps and bolts & nuts.
Possible applications
Standard walkway
Passerella
Tecnical TABLE
Components | Profile type | Dimensions (mm) |
- Structure |
C-profile C-profile I-profile I-profile |
300 x 100 x 15 150 x 45 x 8 200 x 100 x 10 150 x 75 x 8 |
- handrail | C-profile (*ergonomic) |
60 x 50 x 5 |
- stanchion | square profile |
50 x 50 x 5 |
- toe plate | flat shaped profile |
150 x 5 |
- knee rail | flat shaped profile tubolar kneerail |
55 x 5 |
The walking surface consists of GRP grating panels. |